80557 - 7045A42 Front seat GUARD (one), left or right - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.- Carry out the operations described below to remove the centre guard.1. Undo the fixing bolts.2. Acting on the retaining springs (2a), remove the centre guard (2b) separating it from the left side guard (2c).
- Carry out the operations described below to remove the left side guard.- Disconnect the negative battery terminal.    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.- Remove the centre guard carrying out the operations described above.    See in Op. 7045J10 switch unit for movement of one front seat, l/h or r/h - r+r for check1. Undo the fixing bolt.2. Turn the side guard (2b) slightly in a clockwise direction (2a) and remove it extracting it in the direction shown by the arrow (2c).
- Carry out the operations described below to remove the right side guard.- Disconnect the negative battery terminal.    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.1. Undo the fixing bolt.2. Turn the side guard (2b) slightly in an anti-clockwise direction (2a) and remove it extracting it in the direction shown by the arrow (2c).
Refitting ( Removing ) - Carry out the operations described below to remove the centre guard.1. Fit the guard (1a), fitting the retaining springs (1b) in the housings in the left side shield (1c).2. Tighten the fixing bolts.
    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.- Connect the negative battery terminal.- Carry out the operations described below to fit the left side guard.1. Position the side guard (1a), checking that the rear centering tooth (1b) is inserted in the housing.2. Fit the hook (2a) in the housing (2b) in the guard.3. Tighten the fixing bolts.
    See in Op. 7045J10 switch unit for movement of one front seat, l/h or r/h - r+r for check- Fit the centre guard carrying out the operations described above.    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.- Connect the negative battery terminal.- Carry out the operations described below to fit the right side guard.1. Fit the guard (1a), inserting the centering pin (1b) in the housing.2. Tighten the fixing bolt.
    See in Op. 7045A10 FRONT SEAT (one) left or right - R.R.- Connect the negative battery terminal.