95901 - 1088D38 CYLINDER HEAD/CRANKCASE WATER CIRCUIT HOSE WITH THERMOSTAT CLOSED - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.     See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1080D24 engine oil vapour intake pipe - r + r    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1084A16 Engine oil dip stick PIPE - R.R.    See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket 1. Disconnect the cylinder head/crankcase water circuit with closed thermostat hose from the thermostat.
Collect the coolant that comes out in a suitable container.
1. Disconnect the band (1a) and remove the hose (1b) for the cylinder head/crankcase water circuit with closed thermostat.
Refitting ( Removing ) - Position the hose for the cylinder head/crankcase water circuit with closed thermostat and secure it to the connector on the crankcase using the band.- Connect the cylinder head/crankcase water circuit with closed thermostat hose to the thermostat.     See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket    See in Op. 1084A16 Engine oil dip stick PIPE - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1080D24 engine oil vapour intake pipe - r + r    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery terminal, then close the boot.- Remove the vehicle from the lift.