74984 - 1048A10 COMPLETE AIR FILTER -R.R.

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.1. Undo the fixing bolts (1a) and the lower bolt (1b) fastening the reinforcement bracket.2. Move the upper crossmember forward.
- Position a container under the vehicle to collect the coolant.1. Disconnect the upper hose from the radiator (rapid connector)
1. Disconnect the electrical connection from the air flow meter.2. Undo the bolts fixing the filter casing mounting bracket.3. Release the air filter casing from the two flexible mountings, then remove the air filter (3a), complete with air flow meter (3b).
Refitting ( Removing ) - Place the air filter, complete with air flow meter, in its housing and fasten it to the two flexible mountings.
Take care to ensure that the filter element is correctly positioned during the refitting, checking that the seal is not coming out of its housing and that it is not damaged.
Clean the air flow meter thoroughly to avoid damaging the sensitive element.
- Tighten the bolts fixing the filter casing mounting bracket.- Connect the electrical connection to the air flow meter.- Position the upper crossmember and tighten the fixing bolts.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead.