498896 - 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

Removing ( Refitting )     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A54 TURBOCHARGER air inlet HOSE from rigid pipe - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Raise the lift.1. Disconnect the band for the air supply hose from the heat exchanger to the rigid pipe.- Lower the lift.2. Disconnect the band for the coupling between the throttle casing and the rigid pipe.3. Disconnect the supercharging air by-pass valve pneumatic connection.4. Disconnect the electrical connection for the intake air temperature and pressure sensor.
DescriptionConnector
4 Integrated air temperature sensorK043
5. Undo the nuts fixing the rigid pipe.6. Remove the rigid air supply pipe between the heat exchanger and the intake manifold.- With the assembly at the bench, disconnect the hose from the rigid pipe.
Refitting ( Removing ) - Fit the rigid air supply pipe complete with hose.- Connect the coupling to the throttle casing.- Connect the electrical connection for the intake air temperature and pressure sensor.
DescriptionConnector
.Integrated air temperature sensorK043
- Connect the supercharging air by-pass valve pneumatic connection.- Raise the lift- Connect the air supply hose from the heat exchanger to the rigid pipe.- Lower the lift.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A54 TURBOCHARGER air inlet HOSE from rigid pipe - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.