| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check:- that the engine oil level is correct
- that there are no significant leaks from lubrication circuit
| Move on to Step | 1. Oil level low | 1. Restore the correct level |
| 2. Leaks detected | 2. Eliminate leaks |
| 1 | LUBRICATION SYSTEM PRESSURE CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the lubrication system pressure is correct See in Op. 0510C20 ENGINE LUBRICATION SYSTEM - Check SUPPLY PRESSURE | Move on to Step | Low engine oil pressure | Move on to Step |
| 2 | LUBRICATION SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the engine oil pump is working properly | Move on to Step | Oil pump faulty | Replace the oil pump See in Op. 1084B10 ENGINE OIL PUMP - R.R. with crankcase sump removed |
| 3 | LUBRICATION SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check:- the seal of the crankshaft duct plugs;
- the main journal/crankcase bearing clearance
| Move on to Step | 1. Plugs faulty | 1. Replace the plugs See in Op. 1024A20 Crankshaft PLUGS, removed - Replace and wash inside of shaft ducts |
| 2. Clearance too large | 2. Restore correct values |
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists | Continue following the instructions in Table K109 |