75341 - 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Raise the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.1. Undo the bolts (1a) and remove the lower flywheel guard (1b).2. Fit the flywheel lock.
DescriptionCodeFunction
2 Counter-torque1.870.827.000Engine flywheel lock
1. Undo the bolts (1a) and remove the crankshaft pulley (1b).
Refitting ( Removing ) - Position the crankshaft pulley in its housing and secure it tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.2.5BoltCRANKSHAFT PULLEYM8
- Remove the flywheel lock.
DescriptionCodeFunction
.Counter-torque1.870.827.000Engine flywheel lock
- Reposition the guard on the bellhousing and secure it using the bolts.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the lift.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.