1008C10 POWER UNIT REACTION ROD - REPLACE - Lancia - THESIS - eLearn

) See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.1. Undo the nut fixing the expansion tank to the support; slightly raise the tank without disconnecting the pipes connected to it to allow the subsequent removal of the bolt fixing the reaction rod.

1. Undo the bolts (1a) and remove the power unit reaction rod (1b).

) - Fit the power unit reaction rod and secure it using the bolts.

	Value - daNm	Fastening	Component	Ø
.	(to bracket on bodyshell) 5	Bolt	POWER UNIT REACTION ROD	M10 X 1.25

	Value - daNm	Fastening	Component	Ø
.	(to engine support) 5	Bolt	POWER UNIT REACTION ROD	M10 X 1.25

- Reposition the expansion tank and secure it to the mounting bracket using the nut. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.