92712 - 1040A14 FUEL TANK - R.R. for REPLACEMENT

Removing ( Refitting )     See in Op. 4450B13 Rear WHEELS (two) - R.R.    See in Op. 7055B45 Right rear wheel arch liner - R.R.    See in Op. 4420A35 Rear suspension SHOCK ABSORBERS - R.R.     See in Op. 1076B20 Rear exhaust SILENCER - R.R.    See in Op. 4420D10 REAR SUSPENSION AXLE - R.R.    See in Op. 1040A10 FUEL TANK - R.R. and decant fuel - Proceed with separating the fuel filler pipe from the tank, acting on the two bands.1. Undo the ring nut (1b), using the tool (1a), then remove the fuel pump (1c), complete with level gauge.
DescriptionCodeFunction
1a Tool for removing fuel pump retaining ring nut1.870.736.000Tool for removing fuel pump retaining ring nut
The float valves and the anti-evaporation pipes connected to it cannot be replaced individually, but with the complete tank.
Refitting ( Removing ) - Position the fuel pump in its housing in the tank.- Fit the ring nut and tighten it torque using the tool.
DescriptionCodeFunction
.Tool for removing fuel pump retaining ring nut1.870.736.000Tool for removing fuel pump retaining ring nut
Replace the gasket under the fuel tank and take care when refitting to ensure that the gasket is correctly positioned thereby guaranteeing the seal.
- Proceed with refitting the fuel filler pipe using new bands.     See in Op. 1040A10 FUEL TANK - R.R. and decant fuel    See in Op. 4420D10 REAR SUSPENSION AXLE - R.R.    See in Op. 1076B20 Rear exhaust SILENCER - R.R.     See in Op. 4420A35 Rear suspension SHOCK ABSORBERS - R.R.    See in Op. 7055B45 Right rear wheel arch liner - R.R.    See in Op. 4450B13 Rear WHEELS (two) - R.R.