93944 - 1080B94 FRONT LAMBDA SENSOR - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot and disconnect the negative battery terminal.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.1. Undo the fixing bolts (1a) and the lower bolt (1b) fastening the reinforcement bracket.2. Move the upper crossmember forward.
1. Disconnect the electrical connection for the front Lambda sensor.
DescriptionConnector
1 Lambda sensor on catalyzerK017
2. Undo and remove the front Lambda sensor (2a) using a USAGE 875/22 type spanner (2b) or a similar tool.
Refitting ( Removing ) - Position the front Lambda sensor and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.4.5-LAMBDA PROBE (ONE)M18 X 1.5
- Connect the electrical connection for the front Lambda sensor.
DescriptionConnector
.Lambda sensor on catalyzerK017
- Position the upper crossmember and tighten the fixing bolts.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.