The vehicle brake lights are located at the rear in the side light clusters and in the special centre third brake light.
The switching on of the brake lights is managed by the Body Computer. The function is activated by the contact with the key-on (INT) go ahead signals.The N.A. switch information is sent via the CAN to the engine management control unit; the latter transmits it via the CAN to the braking control unit and the adaptive cruise control unit. See E5030 PETROL ENGINE ELECTRONIC MANAGEMENT See E5060 CRUISE CONTROL See E5061 ADAPTIVE CRUISE CONTROL See E7021 ASR / TCSThe Body Computer carries out the check function for the brake light bulbs and the state of the protective fuse and any failure state is transmitted to the instrument panel via the CAN. In such a case the information is shown on the panel display.They are operated each time the brake pedal is pressed via the special switch on the actual pedal.
