197600 - 7050M26 Rear seat backrest heater pad, left or right - R.R. after electric circuit check

Refitting

    See in Op. 7050A19 REAR SEAT BACKREST - R.R.1. Release the part connected to the heater pad from the head restraint pins housing and remove it.

1. Release the cover along the backrest perimeter in the area connected to the heater pad.

1. Remove the retaining seals (1a) and separate the cover (1b) from the backrest upholstery in the area affected by the heater pad.

1. Detach the heater pad and remove it.

Refitting ( Removing ) - Check that the heater pad is not damaged.- Replace the double-sided tape on the heater pad.- Position the heater pad and secure the adhesive side to the backrest upholstery.- Fit the cover on the upholstery and secure it using the sealing rings.

	Description	Code	Function
.	Pliers for metal points	1.878.017.001	Fastening cover to upholstery

- Fit the cover surround along the perimeter.- Fit the head restraint pins in place.    See in Op. 7050A19 REAR SEAT BACKREST - R.R.    See in Op. 7050A20 Single rear seat cushion - R.R.- Connect the negative battery terminal.