100091 - 1044B10 fuel filter assembly - r + r or replace

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.1. Disconnect the front fuel supply pipe from the fuel filter.2. Disconnect the supply pipe to the pressure pump from the fuel filter.3. Disconnect the supply pipe to the fuel return manifold from the fuel filter.4. Disconnect the electrical connections for the fuel temperature diesel resistance (4a) and (4b).5. Undo the fixing nuts (5a) and remove the fuel filter assembly (5b).
DescriptionConnector
4a Diesel pre-heating resistanceO020A
DescriptionConnector
4b Diesel pre-heating resistanceO020B
Refitting ( Removing ) - Fit the fuel filter assembly and tighten the fixing nuts to torque.
Value - daNmFasteningComponentØ  
.2.4NutFUEL FILTERM8
- Connect the electrical connections for the sensors.
DescriptionConnector
.Diesel pre-heating resistanceO020A
DescriptionConnector
.Diesel pre-heating resistanceO020B
- Connect the fuel pipes disconnected previously.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead and close the boot.