| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 1 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the condition of the fuse for the light power circuit in the Dashboard Junction Unit (Wiring Diagram ) E2011 DIPPED BEAMS | Move on to Step | Fuse blown | Replace the fuse (Wiring Diagram ) E2011 DIPPED BEAMS |
| 2 | XENON BULB CONDITION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Extract the light from its housing dismantling it and checking the condition of the xenon bulb | Move on to Step | Bulb burnt out | Replace the bulb |
| 3 | LAMP ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the condition of the cables inside the lamp between the connector and the module for the xenon bulb. | Move on to Step | interruption or no insulation for the internal cables. | Restore the electrical connection, if necessary, replace the lamp (Wiring Diagram ) E2011 DIPPED BEAMS |
| 4 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity and the insulation of the wiring between the headlamps and the earth (Wiring Diagram ) E2011 DIPPED BEAMS | Move on to Step | Interruption or no insulation for the electrical connection | Restore the electrical connection (Wiring Diagram ) E2011 DIPPED BEAMS |
| 5 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity and the insulation of the wiring between the front headlamp and the Dashboard Junction Unit (Wiring Diagram ) E2011 DIPPED BEAMS | Move on to Step | Interruption or no insulation for the electrical connection | Restore the electrical connection (Wiring Diagram ) E2011 DIPPED BEAMS |
| 6 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity and the insulation of the internal wiring between the outlet connector for the Dashboard Junction Unit and the Fuse for the power circuit (Wiring Diagram ) E2011 DIPPED BEAMS | Move on to Step | Interruption or no insulation for the Dashboard Junction Unit internal connection | Replace Dashboard Junction Unit See in Op. 5505A10 Junction UNIT - R.R. |
| 7 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists. | Replace xenon bulb electronic module |
