167785 - K110 ENGINE OIL LEVEL INFORMATION INCORRECT

The matrix shows "low engine oil level" information that does not correspond to the level shown on the dipstick;

the engine oil level information is manageed by the Instrument Panel Node by means of an oil level sensor on the engine connected directly to the Instrument Panel Node.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the reconfigurable matrix display is not showing an oil level sensor fault message	Move on to Step	Oil sensor fault message present	Move on to Step
1	CHECK USING DIAGNOSTIC EQUIPMENT.	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the tester input and check the following at the Instrument Panel Node: in error environment no fault in oil level sensor	Move on to Step	Error in oil sensor	Move on to Step
2	CHECK OIL LEVEL SENSOR	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check operation of the engine oil level sensor     Continue following the instructions in the test 5560BO Engine oil level sensor check	Move on to Step	Fault in oil level sensor	Replace sensor     See in Op. 1084A40 ENGINE OIL LEVEL SENSOR - R.R.
3	ELECTRICAL SYSTEM CHECK.	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the continuity and the insulation of the wiring between the sensor and instrument panel (Wiring Diagram ) E4010 INSTRUMENT PANEL	Move on to Step	Wiring broken or not insulated	Restore the electrical connection (Wiring Diagram ) E4010 INSTRUMENT PANEL
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace instrument panel    See in Op. 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace