J40 REAR VIEW MIRRORS ELECTRICAL ADJUSTMENT NOT WORKING - Lancia - THESIS - eLearn

When the control is operated the external mirror does not move

the mirror is adjusted by the Driver's Door Node according to information from the adjustment joysticks located on the door handle.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic connect and check the following at the Driver's Door Node: In errors ambient that there are no faults In parameters ambient the plausibility of the parameters detected at the joystick left/right/up/down	Move on to Step	1. Presence of faults	1. Continue following the instructions for the diagnostic equipment.
		Move on to Step	2. Mirror selector joystick parameters (left/right/up/down) not plausible	Move on to Step
2	COMPONENT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Remove the door handle, remove the joystick and check the operation of the selector Continue following the instructions in the test 7005RA Check on operation of door mirror adjustment/folding	Move on to Step	Component faulty	Replace the external mirrors control joystick See in Op. 7005R40 CONTROL SWITCHES for adjusting exterior rear view mirror(s) - R.R.
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace the Driver's Door Node