| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 0 | PRELIMINARY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the warning light (matrix message) is on. | Move on to Step | The warning light is off | Move on to Step |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Headlamp Alignment Corrector control unit:- that there are no faults.
| Move on to Step | Presence of faults | Continue following the instructions for the diagnostic equipment |
| 2 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check:- the presence of the C.A.F. control unit positive supply from the fuse in the dashboard junction unit
- the presence of the positive go ahead from the dipped headlamps
- the condition of the C.A.F. control unit connection to earth (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | 1. No positive supply | Move on to Step |
| Positive go ahead from dipped headlamps lacking | Move on to Step |
| 3. No connection to earth | Move on to Step |
| 3 | C.A.F. CONTROL UNIT SUPPLY ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity/insulation between:- C.A.F. control unit and intake connector at Body Computer Node (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | Electrial connection interrupted | Restore the electrical connection (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR |
| 4 | DASHBOARD NODE INTERNAL TRACK CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Remove the Body Computer Node, dismantle it from the dashboard junction unit and check the continuity between:- input connector from C.A.F. and Body Computer Node/Junction Unit connector (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | Electrial connection interrupted | Replace body computer See in Op. 5505A32 BODY COMPUTER - R.R. |
| 5 | GO AHEAD FROM DIPPED HEADLAMPS ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity/insulation between:- C.A.F. control unit and input connector in dashboard junction unit (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | Electrial connection interrupted | restore the electrical connection (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR |
| 6 | DASHBOARD JUNCTION UNIT INNER TRACK CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the internal continuity between:- input connector from C.A.F. to left front dipped headlamp bulb fuse (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | Electrial connection interrupted | Replace the dashboard junction unit See in Op. 5505A10 Junction UNIT - R.R. |
| 7 | CONNECTION TO EARTH ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity/insulation between:- C.A.F. control unit and right front earth point (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR
| Move on to Step | Electrial connection interrupted | restore the electrical connection (Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR |
| 8 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists | Replace the headlamp alignment corrector control unit See in Op. 5540C50 Gas discharge LIGHT CLUSTER CORRECTION/ALIGNMENT CONTROL UNIT - R.R. |
