100226 - 1048A54 TURBOCHARGER air inlet HOSE from rigid pipe - R.R.

Refitting

1. Disconnect the rigid section of the resonator pipe from the hose joined to the air filter casing.2. Disconnect the flexible air inlet pipe from the turbocharger.3. Undo the nut fixing the resonator.4. Remove the turbocharger air intake pipe, complete with resonator, from the lower part of the engine compartment.5. With the assembly at the bench, disconnect the air intake hose from the resonator acting on the retaining bands (5a) and (5b).

Refitting ( Removing ) - With the assembly at the bench, fit the turbocharger air intake hose, connecting it to the resonator.- Position the assembly in the engine compartment and connect it to the turbocharger and to the hose joined to the filter casing.- Tighten the fixing nut.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.