100655 - 1060E10 PRESSURE PUMP for diesel injection - R.R.

Removing ( Refitting )     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Position the vehicle on a lift.- Open the boot and disconnect the negative battery terminal.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1032D12 Timing system protective COVER(S) - R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1060E30 PRESSURE PUMP drive PULLEY - R.R.    See in Op. 1060F20 PIPE from PRESSURE PUMP to FUEL MANIFOLD - R.R.    See in Op. 1060F34 PIPE from fuel MANIFOLD to INJEJCTOR - R.R.1. Disconnect the fuel pipe for lubricating the injectors (1a) and the fuel return pipe to the pressure pump (1b) from the fuel return manifold pipe.- Undo the fixing nuts and release the fuel return manifold from the housing in the intake manifold.
1. Disconnect the electrical connection for the fuel pressure regulator.
DescriptionConnector
1 Fuel pressure regulatorN077
2. Disconnect the fuel supply pipe from the tank from the pressure pump.3. Undo the nuts fixing the pressure pump to the mounting.- Remove the pressure pump.
Refitting ( Removing ) - Fit the pressure pump fastening it to the studs on the pump mounting.- Tighten the fixing nuts to torque.
Value - daNmFasteningComponentØ  
.2.5NutPRESSURE PUMPM8
- Connect the fuel supply pipe from the tank to the pressure pump.- Connect the electrical connection for the fuel pressure regulator.
DescriptionConnector
.Fuel pressure regulatorN077
- Fit the fuel return manifold in the housing on the intake manifold.- Tighten the fixing nuts to torque.- Connect the fuel pipe for lubricating the injectors and the fuel return pipe to the pressure pump.    See in Op. 1060F34 PIPE from fuel MANIFOLD to INJEJCTOR - R.R.    See in Op. 1060F20 PIPE from PRESSURE PUMP to FUEL MANIFOLD - R.R.    See in Op. 1060E30 PRESSURE PUMP drive PULLEY - R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1032D12 Timing system protective COVER(S) - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.-    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Open the boot and connect the negative battery terminal.- Remove the vehicle from the lift.