100676 - 1060F20 PIPE from PRESSURE PUMP to FUEL MANIFOLD - R.R.

Removing ( Refitting )     See in Op. 1016A10 1. Undo the connector for the pipe from the return manifold.2. Undo the connector for the pipe from the pressure pump.3. Remove the pipe from the pressure pump to the fuel manifold.
Refitting ( Removing ) - Fit the new pipe from the pressure pump to the fuel manifold.
Each time work is carried out on the pipe from the pressure pump to the fuel manifold it must be replaced with a new one to prevent fuel leaks from the connectors.
- Tighten the connectors on the pressure pump and on the return manifold to torque.
Value - daNmFasteningComponentØ  
.2.3ConnectorPRESSURE PUMP LINE TO FUEL MANIFOLDM14 X 1.5
    See in Op. 1016A10