100685 - 1060F36 PIPES (all) from fuel MANIFOLD to INJECTORS - R.R.

Removing ( Refitting )     See in Op. 1016A10 - Disconnect the negative battery terminal.1. Disconnect the electrical connections for the injectors.
DescriptionConnector
1 InjectorN070A
DescriptionConnector
1 InjectorN070B
DescriptionConnector
1 Climate control sytem control unitM070C
DescriptionConnector
1 InjectorN070D
DescriptionConnector
1 InjectorN070E
2. Undo the pipe connectors from the injectors.3. Undo the pipe connectors from the single fuel manifold.4. Remove the pipes connecting the fuel manifold and the injectors.
Refitting ( Removing ) - Fit the new pipes from the manifold to the injectors.
Each time work is carried out on the pipes between the injectors and the fuel manifold, they have to be replaced with new ones to prevent fuel leaks from the connectors.
- Tighten the pipe connectors on the return manifold and on the injectors to torque.
Value - daNmFasteningComponentØ  
.2ConnectorsPIPE FUEL MANIFOLD TO INJECTORSM12X1.5
- Connect the electrical connections for the injectors.
DescriptionConnector
.InjectorN070A
DescriptionConnector
.InjectorN070B
DescriptionConnector
.InjectorN070C
DescriptionConnector
.InjectorN070D
DescriptionConnector
.InjectorN070E
    See in Op. 1016A10 - Connect the negative battery terminal.