100719 - 1060G22 CAM ANGLE SENSOR - R.R.

Removing ( Refitting )     See in Op. 1016A10     See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 1092G10     See in Op. 1032D12     See in Op. 1032B10     See in Op. 1032B40 1. Undo the fixing bolts (1a) and remove the side guard (1b) for the timing belt.2. Disconnect the electrical connection for the cam angle sensor located near the engine oil dipstick pipe.3. Undo the bolts (3a) and remove the cam angle sensor (3b).
DescriptionConnector
2 Timing sensorK047
Refitting ( Removing ) - Position the sensor and tighten the fixing bolt.- Tighten the sensor fixing bolts to torque.
Value - daNmFasteningComponentØ  
.0.9BoltCAM ANGLE SENSORM6
- Connect the electrical connection.
DescriptionConnector
.Timing sensorK047
- Position the timing belt side guard and tighten the fixing bolts.    See in Op. 1032B40     See in Op. 1032B10     See in Op. 1032D12     See in Op. 1092G10     See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1016A10