100728 - 1060G80 Diesel electronic injection system CONTROL UNIT - R.R.
Removing
(
Refitting
)
1. Undo the bolts fixing the left front wheel arch liner.2. Disconnect the two electrical connections (2a) and (2b) from the engine management control unit.3. Undo the fixing nuts (3a) and remove the engine management control unit (3b). | Description | Connector |
|---|---|---|
| 2a | Engine management control unit | M010A |
| Description | Connector |
|---|---|---|
| 2b | Engine management control unit | M010B |
Refitting
(
Removing
)
- Fit the engine management control unit in the housing in the bodyshell and tighten the fixing nuts to torque.- Connect the electrical connections for the engine management control unit. | Description | Connector |
|---|---|---|
| . | Engine management control unit | M010A |
| Description | Connector |
|---|---|---|
| . | Engine management control unit | M010B |