Removing
(
Refitting
)
1. Position the variable geometry turbocharger assembly in a vice.2. Undo the fixing nuts (2a) and remove the hose connected to the exhaust pipe (2b).
1. Undo the fixing nuts (1a) and separate the exhaust manifold (1b) from the turbocharger (1c).
Refitting
(
Removing
)
- Fit the variable geometry turbocharger on the exhaust manifold.- Tighten the fixing nuts to torque.
Value - daNm
Fastening
Component
Ø
.
2.5
Nuts
TURBOCHARGER
M8
- Fit the hose connected to the exhaust pipe.- Tighten the fixing nuts to torque.
Value - daNm
Fastening
Component
Ø
.
2.5
Nuts
SLEEVE TO EXHAUST PIPE
M8
- Remove the variable geometry turbocharger assembly complete with exhaust manifold.
Removing
(
Refitting
)
1. Position the variable geometry turbocharger assembly in a vice.2. Undo the fixing nuts (2a) and remove the hose connected to the exhaust pipe (2b).
