103017 - 1064A27 PIPE between vacuum reservoir and actuator control solenoid valve - R.R.
Removing
(
Refitting
)
See in Op. 1016A10 1. Undo the bolts fixing the rigid section of the pipe.2. Disconnect the flexible pipe from the vacuum reservoir.3. Disconnect the flexible pipe from the actuator control solenoid valve.4. Remove the pipe assembly.
Refitting
(
Removing
)
- Fit the pipe assembly.- Connect the flexible pipe to the actuator control solenoid valve.- Connect the flexible pipe to the vacuum reservoir.- Tighten the bolts fixing the rigid section of the pipe. See in Op. 1016A10