7010C48 REAR DOOR OPENING INNER HANDLE/TRIM (ONE), LH OR RH - R R - Lancia - THESIS - eLearn

111203 - 7010C48 Rear door opening INNER HANDLE/TRIM (one), lh or rh - r r

) - Disconnect the negative battery terminal. See in Op. 7010E10 Rear side door INNER PANEL - R.R. or Replace1. Undo the fixing bolts (1a) and remove the inner grip (1b).2. Undo the fixing bolts (2a) and remove the armrest (2b).3. Release the retaining springs (3b) using the tool (3a) and remove the inner panel trim (3c).

	Description	Code	Function
3a	Knife	1.878.077.000	Removing rear door inner panel cover

1. Release the moulding and remove it.2. Undo the bolts (2a) and remove the inner handle/trim (2b).

Refitting ( Removing

) - Place the inner handle/trim in position and tighten the fixing bolts.- Fit the moulding in the housing checking that the springs are correctly positioned.- Fit the inner panel trim in the housing and secure it using the retaining springs.- Fit the armrest and fasten it using the bolts.- Fit the inner grip and tighten the fixing bolts. See in Op. 7010E10 Rear side door INNER PANEL - R.R. or Replace- Connect the negative battery terminal.- Check that the component is working.