155795 - 3340B75 Rigid pipes from connectors to rear brakes - R.R. with reservoir removed

Removing ( Refitting ) 1. Undo the connectors (1a) joining the front sections to the rear sections and also remove the fastening bands (1b). 1. Undo the connector joining the rigid section to the flexible section of the right rear brake pipe.- Repeat this operation on the left brake caliper pipe.2. Remove the rigid pipe assemblies. Refitting ( Removing ) - Fit the two rigid pipes to the rear brakes and tighten the connectors for the flexible sections to the brake calipers.

	Value - daNm	Fastening	Component	Ø
.	1.4	Connector	BRAKING SYSTEM PIPE BRAKES	M10

- Connect the two pipes to the connectors.- Secure the two rigid pipes to the bodyshell using the plastic retaining bands.