174250 - 4130B80 Rigid pipe from heat exchanger to fluid reservoir - R.R. includes bleeding air

Removing ( Refitting )     See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation. 1. Working on the retaining band (1a), disconnect the Duplex flexible pipe (1b) from the rigid pipe.2. Undo the fixing nuts.3. Remove the rigid pipe from the heat exchanger to the reservoir. Refitting ( Removing ) - Fit the rigid pipe from the heat exchanger to the reservoir.- Tighten the nuts fixing the pipe to the power assisted steering box.- Connect the flexible Duplex pipe to the rigid pipe.     See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with refitting the front suspension frame; carry out the appropriate operation.