180160 - 4440K30 LEFT OR RIGHT REAR INTELLIGENT SUSPENSION SHOCK ABSORBER (ONE) - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.- Partly remove the load carrying compartment lining.    See in Op. 7040B10 LOAD CARRYING COMPARTMENT LINING - R.R.    See in Op. 7040B17 Luggage compartment/load platform side trim flap (one) - Replace    See in Op. 7040B13 Luggage compartment/load platform SIDE LINING - R.R.- Remove the rubber plug in the bodyshell and release the wiring, as necessary, to gain access to the electrical connector.1. Disconnect the electrical connection for the shock absorber.
DescriptionConnector
1 SCS right rear actuatorN098
DescriptionConnector
1 SCS left rear actuatorN099
- Position the vehicle on a lift.    See in Op. 4450B11 Rear WHEEL (one) - R.R.    See in Op. 7055B43 REAR WHEEL ARCH LINER (one), left or right - R.R.1. Release the electical wiring for the shock absorber from the fastening on the bodyshell.- Remove the hydraulic support2. Undo the bolts fixing the shock absorber to the bodyshell.3. Using the tool (3a), undo the lower nut (3b) fixing the shock absorber to the track control arm and keep the washer (3c).4. Remove the shock absorber from the housing.
DescriptionCodeFunction
3a Spanner1.857.020.000Spanner for fixing rear lower shock absorber lower fastening
Refitting ( Removing ) - Fit the shock absorber in the special housing in the rear suspension tighten the bolts fixing it to the bodyshell.- Tighten the nut fixing the shock absorber to the rear suspension to torque.- Reposition the electrical wiring in the special opening in the bodyshell.    See in Op. 7055B43 REAR WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 4450B11 Rear WHEEL (one) - R.R.- Lower the vehicle and remove it from the lift and position it on a support.- Tighten the nut fixing the shock absorber to the rear suspension to torque.
Value - daNmFasteningComponentØ  
.(steering knuckle side) 3.5NutREAR SHOCK ABSORBERS (S.M.)M10
- Tighten the bolts fixing the shock absorber to the bodyshell to torque.
Value - daNmFasteningComponentØ  
.(bodyshell side) 6BoltREAR SHOCK ABSORBERS (S.M.)M10 x1,25
- Connect the electrical connection for the shock absorber.
DescriptionConnector
.SCS right rear actuatorN098
DescriptionConnector
.SCS left rear actuatorN099
    See in Op. 7040B13 Luggage compartment/load platform SIDE LINING - R.R.    See in Op. 7040B17 Luggage compartment/load platform side trim flap (one) - Replace    See in Op. 7040B10 LOAD CARRYING COMPARTMENT LINING - R.R.- Connect the negative battery terminal.