197597 - 7050M22 Rear seat CUSHION HEATER PAD, left or right - R.R. after electric circuit check

Removing ( Refitting ) - Disconnect the negative battery terminal.    See in Op. 7050A20 Single rear seat cushion - R.R.1. Release the cover (1a), in the area concerned, releasing the duct (1b) from the cushion frame (1c).
1. Remove the retaining seals (1a) and release the cover (1b) from the cushion upholstery (1c).
1. Detach the heater pad and remove it.
Refitting ( Removing ) - Check that the heater pad is not damaged.- Replace the double-sided tape on the heater pad.- Position the heater pad and fasten the adhesive side to the cushion upholstery.- Fit the cover on the cushion upholstery and secure it using the retaining seals.
DescriptionCodeFunction
.Pliers for metal points1.878.017.001Fastening cover to upholstery
- Fit the cover surround along the entire perimeter.    See in Op. 7050A20 Single rear seat cushion - R.R.- Connect the negative battery terminal.