498109 - 1028H58 Small end bush (one) - Replace
Removing
(
Refitting
)
1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram. | Description | Code | Function |
|---|---|---|---|
| 1c | Extractor/Fitting tool | 1.860.821.001 | Small end bush removal/introduction |
Refitting
(
Removing
)
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram. | The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end. |
| Description | Code | Function |
|---|---|---|---|
| 1c | Extractor/Fitting tool | 1.860.821.001 | Small end bush removal/introduction |
 | Subject | Value |
|---|---|---|
| . | Small end bush | mm |
| - | Inner diameter | 25.279 ÷ 25.512 |
