1088C20 WATER PUMP - R.R. WITH ENGINE REMOVED - Lancia - THESIS - eLearn

498154 - 1088C20 Water pump - R.R. with engine removed

) See in Op. 1032B16 Toothed timing drive belt - R.R. with engine removed- Proceed with the removal1. Undo the bolt (1a) for the toothed driven pulley using the tools (1b) and (1c) for counter-torque.

	Description	Code	Function
1b	Support for counter-torque	1.831.146.000	Loosen/Tighten driven toothed pulley bolt

	Description	Code	Function
1c	Counter-torque	1.831.146.001	Loosen/Tighten driven toothed pulley bolt

2. Remove the toothed driven pulley.

1. Undo the bolts (1a) and remove the cam angle sensor (1b).

1. Undo the bolts (1a) and remove the water pump (1b) complete with O-ring (1c).

Refitting ( Removing

) - Position the water pump, complete with new O-ring, in its housing and secure it tightening the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	(Cylinder head side) 2.3 - 3.3	Bolt	COOLANT PUMP	M8

- Fit the cam angle sensor and secure it using the bolts.

	Value - daNm	Fastening	Component	Ø
.	0.8 - 1.2	Bolt	CAM ANGLE SENSOR

- Place the toothed driven pulleyin its housing.- Tighten the toothed driven pulley bolt to the recommended torque using the tools for counter-torque.

	Value - daNm	Fastening	Component	Ø
.	11.0 ÷ 15.9	Bolt	TIMING DUCT PULLEY	M12

	Description	Code	Function
.	Support for counter-torque	1.831.146.000	Loosen/Tighten driven toothed pulley bolt

	Description	Code	Function
.	Counter-torque	1.831.146.001	Loosen/Tighten driven toothed pulley bolt

See in Op. 1032B16 Toothed timing drive belt - R.R. with engine removed- Proceed with refitting