75457 - 1008A42 Power unit RIGID MOUNT - GEARBOX side - R&R

Removing ( Refitting ) - Position the vehicle on a lift.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the lift.- Position the hydraulic engine support under the oil sump in order to work safely.1. Undo the bolts fixing the rigid support to the gearbox.2. Undo the pin connecting the rigid support to the flexible mounting.3. Remove the gearbox side rigid engine support.
Refitting ( Removing ) - Fit the rigid engine support in the special housing and tighten the pin joining the rigid support to the flexible mounting to torque.
Value - daNmFasteningComponentØ  
.(mounting side) 5Threaded pinPOWER UNIT GEAR BOX END RIGID MOUNTM10
- Tighten the bolts fixing the support to the gearbox to torque.
Value - daNmFasteningComponentØ  
.(Gearbox side) 5BoltsPOWER UNIT GEAR BOX END RIGID MOUNTM10
- Remove the hydraulic safety device positioned under the oil sump.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Remove the vehicle from the lift.