1008B10 FLEXIBLE MOUNTING FOR POWER UNIT FRONT SUPPORT (TIMING SIDE) - REPLACE - Lancia - THESIS - eLearn

75472 - 1008B10 FLEXIBLE MOUNTING for power unit front support (timing side) - Replace

) - Position the vehicle on a lift.- Open the boot and disconnect the negative battery terminal. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R. See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R. See in Op. 1016A10 SOUND-PROOFING COVER - R.R.1. Undo the bolt fixing the reaction rod to the bodyshell.

- Position a hydraulic lift under the sump in order to work safely.1. Undo the nut (1a) fixing the rigid rear support (1b) to the mounting.

1. Undo the nut (1a) fixing the compressor/engine support (1b) to the flexible mounting.

1. Undo the fixing bolts.- Using the hydraulic lift, slightly raise the engine until the support slips away from the flexible mounting stud.2. Remove the flexible mounting from the housing in the crossmember.

Refitting ( Removing

) - Fit the flexible mounting in the special housing in the crossmember.- Tighten the bolts fixing the flexible mounting to the chassis to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10 X 25

- Tighten the nut fixing the support to the flexible mounting to the engine support to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Nut	RIGID TIMING SUPPORT POWER UNIT	M10X1.25

- Tighten the nut fixing the engine support/intermediate shaft to the flexible mounting to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25

- Remove the hydraulic lift from under the sump.- Tighten the bolt fixing the reaction rod to the bodyshell to torque.

	Value - daNm	Fastening	Component	Ø
.	(body) 3	Bolt	POWER UNIT REACTION ROD	M8

See in Op. 1016A10 SOUND-PROOFING COVER - R.R. See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R. See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R. See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.