1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK/S - REPLACE - Lancia - THESIS - eLearn

75478 - 1008B30 Gearbox side mount FLEXIBLE BLOCK/S - Replace

) 1. Release the fuse box illustrated from the junction unit.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Place a hydraulic device for supporting the power unit under the gearbox.1. Undo the pin fixing the engine support to the flexible mounting.2. Undo the nuts fixing the flexible mounting.3. Remove the flexible mounting.

Refitting ( Removing

) - Fit the flexible mounting in the special housing.- Tighten the nuts fixing the flexible mounting to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Nut	GEARBOX SIDE RUBBER MOUNT	M10X 1.25

- Tighten the pin fixing the engine support to the flexible mounting to torque.

	Value - daNm	Fastening	Component	Ø
.	(Mounting side) 5	Threaded pin	POWER UNIT GEAR BOX END RIGID MOUNT	M10

- Remove the hydraulic device for supporting the power unit from underneath the gearbox. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Position it in the special housing in the engine compartment junction unit.