75487 - 1008C10 Power unit REACTION ROD - Replace

Removing ( Refitting )     See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.1. Disconnect the electrical connection for the sensor on the engine coolant reservoir.
DescriptionConnector
.Engine coolant level sensorK026
2. Undo the fixing bolt (2a) and move the engine coolant reservoir (2b) from its housing.
1. Undo the bolts fixing the reaction rod to the bodyshell and to the engine.2. Remove the reaction rod.
Refitting ( Removing ) - Fit the reaction rod and tighten the bolts fixing it to the bodyshell and to the engine to torque.
Value - daNmFasteningComponentØ  
.(body) 5BoltPOWER UNIT REACTION RODM10
Value - daNmFasteningComponentØ  
.(engine) 5BoltPOWER UNIT REACTION RODM10
- Position the engine coolant reservoir in the special housing.- Tighten the bolt fixing the reservoir to the bodyshell.- Connect the electrical connection for the engine coolant level sensor.
DescriptionConnector
.Engine coolant level sensorK026
    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.