75522 - 1016A20 Single TAPPET COVER - R.R. and Replace gasket

Removing ( Refitting )     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1064A27 PIPE between vacuum reservoir and actuator control solenoid valve - R.R.1. Disconnect the two oil vapour pipes from the tappet cover.2. Undo the fixing bolts.3. Remove the tappet cover.
Refitting ( Removing ) - Fit the tappet cover on the cylinder head.- Tighten the bolts fixing the tappet cover to torque.
Value - daNmFasteningComponentØ  
.1BoltsCAM COVERM6
- Connect the oil vapour recovery pipes to the tappet cover.    See in Op. 1064A27 PIPE between vacuum reservoir and actuator control solenoid valve - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.