75584 - 1020A46 Crankcase oil sump BULKHEAD - R.R. with crankcase sump removed

Removing ( Refitting ) 1. Remove the sump oil return pipe connector.2. Remove the sump condensation oil return inner connector complete with O-Ring.3. Undo the fixing bolts (3a) and remove the sump bulkhead (3b) fastened to the oil sump. Refitting ( Removing ) - Fit the bulkhead and tighten the bolts fixing it to the engine oil sump.

	Value - daNm	Fastening	Component	Ø
.	0.8 ÷ 1.0	Bolt	CRANKCASE OIL SUMP PARTITION	M6

- Fit the sump condensation oil return inner connector replacing the O-Ring.- Fit the sump oil return pipe connector.