1088B20 ENGINE COOLING RADIATOR - R.R. - Lancia - THESIS - eLearn

76178 - 1088B20 Engine cooling RADIATOR - R.R.

) See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 4450B12 Front WHEELS (two) - R.R. See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- (right side) See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- (right side) See in Op. 7210E10 FRONT BUMPER1. Undo the fixing nuts (1a) and remove the bonnet lock (1b) from its housing in the crossmember.2. Undo the lower nut (2a) and remove the lock reinforcement bracket (2b).

1. Undo the fixing bolts.2. Remove the upper front crossmember.

1. Remove the cold air intake from the connector on the air filter.

- Have a suitable container for collecting the coolant ready.- Raise the lift.1. Disconnect the lower radiator pipe.

- Lower the lift.1. Disconnect the upper radiator pipe.- Remove the container for collecting the engine coolant.

To disconnect both pipes, press the springs, manually, and release the rapid pipe connector from the attachments on the radiator.

1. Disconnect the electrical connections (1a) and (1b) for the engine cables/fan-radiator cables coupling.2. Undo the nut (2a) and disconnect the earth lead (2b) from the bodyshell.

	Description	Connector
1a	Front/radiator coupling	D009A

	Description	Connector
1b	Front/radiator coupling	D009B

	Description	Connector
2b	Right front earth	C011

1. Undo the bolts fixing the air/air heat exchanger to the radiator.2. Undo the bolts fixing the condenser to the radiator.3. Release the radiator-fan assembly from the lower fastenings and remove it through the top of the engine compartment.

Refitting ( Removing

) - Position the radiator-condenser-fan assembly in the special housing on the lower crossmember, engaging the rubber mountings in the lower part of the radiator in the special housing in the crossmember.- Tighten the bolts fixing the air/air heat exchanger to the radiator.- Tighten the bolts fixing the condenser to the radiator.- Connect the electrical connections for the engine cables/fan-radiator cables coupling.

	Description	Connector
.	Front/radiator coupling	D009A

	Description	Connector
.	Front/radiator coupling	D009B

- Connect the earth lead to the bodyshell and secure it using the fixing nut.

	Description	Connector
.	Right front earth	C011

- Connect the upper and lower engine coolant pipes to the radiator.- Fit the cold air intake to the connector on the air filter.- Fit the upper front crossmember and tighten the fixing nuts to torque.

	Value - daNm	Fastening	Component	Ø
.	0.6	Bolts	FRONT WING CROSSMEMBER HEADLAMP HOUSINGS	M6

- Fit the bonnet lid lock complete with bracket and tighten the nuts fixing it to the upper crossmember and to the lower crossmember. See in Op. 7210E10 FRONT BUMPER See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- (right side) See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- (right side) See in Op. 4450B12 Front WHEELS (two) - R.R. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.