76220 - 1088D24 RIGID PIPE for coolant inlet to water pump - R&R

Removing ( Refitting )     See in Op. 1016A10     See in Op. 1048B44     See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Have a suitable container for collecting the coolant ready.- Disconnect the lower radiator pipe and drain the engine coolant into the container underneath.1. Disconnect the engine coolant pipes from the rigid pipe.2. Undo the bolts fixing the rigid water inlet pipe from the cylinder head.3. Remove the rigid pipe from the engine compartment.
Refitting ( Removing ) - Fit the rigid pipe in the housing on the cylinder head.- Tighten the bolts fixing the rigid pipe to the cylinder head to torque.
Value - daNmFasteningComponentØ  
.(Cylinder head) 0.9BoltCOOLANT PUMP RIGID INLET PIPEM6
- Connect the engine coolant pipes to the rigid pipe.    See in Op. 1048B44     See in Op. 1016A10     See in Op. 0010T20 Engine REFRIGERANT FLUID - Change- [0010T21]    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.