78672 - 3340B52 Rigid PIPE (one), from master cylinder (pump) to A.B.S. hydraulic control unit - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.     See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.     See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air1. Undo the connector on the brake pump.2. Remove the rigid pipe connecting the brake pump and the A.B.S. electro-hydraulic control unit.

Refitting ( Removing ) - Fit the rigid pipe connecting the brake pump and the A.B.S. electro-hydraulic control unit.- Tighten the connector on the brake pump to torque.

	Value - daNm	Fastening	Component	Ø
.	1.4	Connector	FRONT BRAKE RIGID PIPE FROM MASTER CYLINDER	M12

    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air     See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.     See in Op. 0010T64 Brake and/or clutch fluid - Check level and top up, if necessary-    See in Op. 0010T65 HYDRAULIC BRAKING SYSTEM - BLEED AIR-- Remove the vehicle from the lift.