78678 - 3340B56 RIGID PIPE from hydraulic CONTROL UNIT to RIGHT FRONT BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.-1. Undo the connector (1a), remove the spring (1b) and release the flexible section of the brake pipe from the rigid section.
    See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R. 1. Undo the fixing nut (1a) and release the wiring holder bracket (1b) from the gearbox flexible control cables mounting bracket (1c).
    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air1. Working from the engine compartment, remove the rigid pipe from the electro-hydraulic control unit to the left front brake without damaging it.
Refitting ( Removing ) - Working from the engine compartment, fit the rigid pipe from the electro-hydraulic control unit to the left front brake without bending or damaging it.- Fit the wiring holder bracket and secure it to the gearbox flexible control cables mounting bracket using the nut.    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air     See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R. - Connect the flexible section of the brake pipe to the rigid section.- Tighten the connector fixing the rigid section to the flexible section to torque.
Value - daNmFasteningComponentØ  
.1.4ConnectorBRAKING SYSTEM PIPE BRAKESM10
- [0010T64]- [0010T65]    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.-- Remove the vehicle from the lift.