78681 - 3340B62 RIGID PIPE (one), left or right, from hydraulic control unit to rear brakes - R.R.

Refitting

    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation1. Undo the connector (1a), remove the retaining bands (1b) and remove the rigid pipe from the lower part of the engine.

Refitting ( Removing ) - Fit the rigid pipe and secure it to the floor of the vehicle using the retaining bands.- Connect the connector joining the front section to the rear section.    See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air- Proceed with refitting the front suspension frame; carry out the appropriate operations- Remove the vehicle from the lift.