4130A10 POWER STEERING BOX - R.R. - Lancia - THESIS - eLearn

78760 - 4130A10 POWER STEERING BOX - R.R.

) - Position the vehicle on the lift with the wheels perfectly straight.- Mark the position of the steering wheel in relation to the upper half-casing.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation1. At the bench, undo the bolts (1a), disconnect the connector (1b) for the return pipe, then remove the power assisted steering box (1c).

Refitting ( Removing

) - Position the power assisted steering box and fasten it to the frame tightening the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	11	Bolt	COMPLETE POWER ASSISTED STEERING BOX	M12 X 1.25

	Value - daNm	Fastening	Component	Ø
.	1.5	Bolt	COMPLETE POWER ASSISTED STEERING BOX	M8

- Connect the connector for the reservoir return pipe to the steering box.

	Value - daNm	Fastening	Component	Ø
.	3	Bolt	RETURN PIPE TO POWER STEERING RESERVOIR	M12 X 1.5

See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench;- Remove the vehicle from the lift.