80204 - 7025A18 l/h or r/h bonnet lid hinge (one) - r+r with lid removed

Removing ( Refitting ) 1. Release the retaining spring, using a screwdriver (without removing it).2. Detach the telescopic strut, bonnet side.3. Undo the bolts (3a) and remove the bonnet hinge (3b). Refitting ( Removing ) - Place the hinge in position and screw in the bodyshell side fixing bolts, without tightening them to torque.- Fit the end of the telescopic strut in the housing in the bonnet hinges.    See in Op. 7025A10 Bonnet Lid - Realignment