80707 - 7055A54 NUMBERPLATE HOLDER - R+R
Removing
(
Refitting
)
Disconnect the negative battery terminal. Op. 7025B18 BOOT LID LINING - R+R1. Disconnect the electrical connectors (1a), (1b) and (1c). | Description | Connector |
|---|
| 1a | No. plate lights and external boot opening switch | F055 |
| Description | Connector |
|---|
| 1b | Left rear light cluster (moving section on boot lid) | F035 |
| Description | Connector |
|---|
| 1c | Right rear light cluster (moving section on boot lid) | F036 |
2. Remove the rubber cap (2a) and adjust the inner fastening clip using an ordinary tool (2b).
3. Undo the nuts and the bolts fixing the number plate holder.
Partly remove the number plate holder.1. Release the lock opening manual control cable (1a) and remove the number plate holder (1b) assembly.
Refitting
(
Removing
)
Place the number plate holder in position and secure the lock opening manual control cable.Tighten the nuts and the bolts fixing the number plate holder.Connect the electrical connectors.Fit the rubber cap removed previously. | Description | Connector |
|---|
| 1a | No. plate lights and external boot opening switch | F055 |
| Description | Connector |
|---|
| . | Left rear light cluster (moving section on boot lid) | F035 |
| Description | Connector |
|---|
| . | Right rear light cluster (moving section on boot lid) | F036 |
Op. 7025B18 BOOT LID LINING - R+RConnect the negative battery terminal.
