80889 - 7210E36 front side door

Carry out the operations with the assistance of a second operator taking care not to damage the paintwork and the actual door.

Removing ( Refitting ) - Disconnect the negative battery terminal.1. Lift up the tab (1a) and disconnect the electrical connector (1b).

	Description	Connector
1b	Left front door coupling	D030

	Description	Connector
1b	Right front door coupling	D031

2. Release the protection (2a) and undo the bolts (2b) fixing the door check strap (2c).3. Undo the upper bolt (3a) and the lower bolt (3b) for the door hinges. 1. Detach the door and rest it on a suitable support. Refitting ( Removing ) - Check that the door is not damaged.- If necessary, retouch the paintwork.- Position the door and tighten the fixing bolts to torque.

	Value - daNm	Fastening	Component	Ø
.	(upper) 1.5	Bolt	FRONT SIDE DOOR HINGES	M6

	Value - daNm	Fastening	Component	Ø
.	(lower) 1.5	Bolt	FRONT SIDE DOOR HINGES	M6

- Connect the electrical connector and close the sealing tab.

	Description	Connector
.	Left front door coupling	D030

	Description	Connector
.	Right front door coupling	D031

- Connect the negative battery terminal.    See in Op. 7005A14 front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment