841003029 - 7050N10 ELECTRO-PNEUMATIC CONTROL UNIT (1) FOR REAR SEAT CUSHION, LEFT OR RIGHT - R.R. WITH CUSHION REMOVED
Removing
(
Refitting
)
1. Move the rear cushion lower vibration restricting band aside.2. Release the rear cushion breathers.3. Disconnect the pneumatic pipes for the electro-pneumatic control units for the rear cushion and for the pumps.4. Disconnect the electrical connections for the rear cushion electro-pneumatic control units.5. Cut the cushion cover retaining rings.6. Undo the fixing bolts and remove the bracket complete with electro-pneumatic control units and pumps.
1. Working at the bench, disconnect the electrical connection for the pump and the control unit (1a) and separate the control unit (1b), the rear pump (1c) and the mounting bracket (1d).
Refitting
(
Removing
)
Working at the bench, connect the electrical connection for the pump and the control unit and fit the control unit and the rear pump on the mounting bracket.Secure the cover using new retaining rings.Fit the bracket complete with control units and pumps.Connect the electrical connections for the rear cushion massage control units.Connect the pneumatic pipes for the electro-pneumatic control units for the rear cushion and for the pumps.Reposition the rear cushion breathers.Reposition the rear cushion lower vibration restricting band.
Removing
(
Refitting
)
1. Move the rear cushion lower vibration restricting band aside.2. Release the rear cushion breathers.3. Disconnect the pneumatic pipes for the electro-pneumatic control units for the rear cushion and for the pumps.4. Disconnect the electrical connections for the rear cushion electro-pneumatic control units.5. Cut the cushion cover retaining rings.6. Undo the fixing bolts and remove the bracket complete with electro-pneumatic control units and pumps.
