841007727 - E5060 CRUISE CONTROL OPERATIONAL DESCRIPTION

Operational Description

The Cruise Control function is managed by engine control unit M010 upon a request by Cruise Control control H007 located to the left of the steering wheel.Cruise Control H007 is ignition-operated ( INT ) at pin 2 , via a line protected by fuse F35 of underfacia junction unit B002.Control H007 is connected to engine control unit ( connector A ) :

• at pin 53 with the ON / OFF signal;
• at pin 55 with the RCL (RECALL) signal;
• at pin 57 with the SET + signal;
• at pin 56 with the SET - signal;

Pins 54 and 59 of connector A of the engine management control unit M010 receive the brake pedal pressed signals coming from the N.C. and N.A. contacts of the brake lights switch I030, respectively, with the supply controlled by the ignition (INT) from the lines protected by fuses F35 and F37 of the junction unit under the dashboard B002.The engine management control unit M010 distributes the brake pedal pressed signal to the other control units installed on the vehicle via the C-CAN line, pins 28 and 29 connector A.Pin 61 of connector A of engine control unit M010 receives a signal from the contact of clutch switch I031 , also for the purposes of programmed function deactivation.Engine control unit M010 is connected via the C Can line from pins 9 and 10 of connector A to Body Computer M001 , pins 32 and 33 of connector B. Body Computer M001 in turn sends a B Can signal to instrument panel E050, which indicates system faults via a message on the display .