98707 - 1036H14 VALVE TAPPET CLEARANCE CHECK
Removing
(
Refitting
)
See in Op. 1016A10 See in Op. 1016A20 1. Using a feeler gauge (1a), measure the clearance (1b) between the camshaft lift and a tappet shim.- Rotate the camshaft and check the clearance for all the tappets. | Subject | Value |
|---|---|---|
| . | Inlet valves clearance in closed position | mm |
| - | Inlet valves clearance in closed position | 0.25 - 0.35 |
| Subject | Value |
|---|---|---|
| . | Exhaust valves clearance in closed position | mm |
| - | Exhaust valves clearance in closed position | 0.30 - 0.40 |
Refitting
(
Removing
)
See in Op. 1016A20 See in Op. 1016A10