5580E72 AERIAL - PASSIVE ENTRY - FRONT DOOR (ONE), LEFT OR RIGHT - R.R. - Lancia - THESIS - eLearn

150998 - 5580E72 AERIAL - PASSIVE ENTRY - front door (one), left or right - R.R.

) - Disconnect the negative battery terminal. See in Op. 7005E18 Front side door armrest - R.R.1. Release the trim for the side door grab hand and remove it.

1. Undo the fixing bolts.2. Lift up the door opening handle (2a), release the cap (2b) and undo the bolt underneath (2c).3. Use the tool (3a) to remove the front door panel (3b).

	Description	Code	Function
3a	Knife	1.878.077.000	Removing rear side door inner panel

1. Undo the fixing bolts (1a), disconnect the electrical connector (1b) and remove the passive entry aerial (1c).

	Description	Connector
1b	RF aerial on left front door for passive entry (NPE)	P094

	Description	Connector
1b	RF aerial on right front door for passive entry (NPE)	P095

Refitting ( Removing

) - Place the passive entry aerial in the housing and connect the eletrical connector.

	Description	Connector
.	RF aerial on left front door for passive entry (NPE)	P094

	Description	Connector
.	RF aerial on right front door for passive entry (NPE)	P095

- Secure the passive entry aerial using the bolts.- Fit the inner door panel in place until the click of the retaining springs is heard.- Tighten the bolts fixing the door panel.- Reposition the trim for the side door grab hand. See in Op. 7005E18 Front side door armrest - R.R.- Connect the negative battery terminal.